Electric Fence
Protect your Business

Call 0302 770358 now to get a free quote

Online Enquiry powered by ServiceM8

Response one Electric fencing

Categories and Accessories

Brackets

Wall top bracket – 6 wire – straight
PIGGYBACK BRACKET – 17 WIRES
WALL TOP BRACKET – 6 WIRE – T-POLE
WALL TOP BRACKET STAY
Wall top bracket – 6 wire – straight

Wall top bracket – 6 wire – straight  Response one offers a large range of brackets to suit most wall types and applications to protect against climbing over. They are made mainly from steel and are finished in a high quality coating of outdoor powder, or hot dip galvanised for coastal conditions. The wall top brackets have the following features:
  • • Squaretube
  • • Straight
  • • 6 wires
  • • Hot dip galvanized or powder coated finish
  • • 995 mm long
  • • Flat bar insulator
  • • Available in black
PIGGYBACK BRACKET – 17 WIRES

Piggyback bracket – 17 wires Response One offers a large range of brackets to suit most wall types and applications to protect against climbing over. They are made mainly from steel and are finished in a high quality coating of outdoor powder, or hot dip galvanised for coastal conditions. The wall top brackets have the following features:

  • • Squaretube
  • • Straight
  • • 17 wires
  • • Hot dip galvanized or powder coated finish
  • • 2500 mm long
  • • Flat bar insulator
  • • Available in black
WALL TOP BRACKET – 6 WIRE – T-POLE

Wall top bracket – 6 wire – T-pole Response one offers a large range of brackets to suit most wall types and applications to protect against climbing over. They are made mainly from steel and are finished in a high quality coating of outdoor powder, or hot dip galvanised for coastal conditions. The wall top bracket have the following features:

  • • Flat bar
  • • T-pole
  • • 6 wires
  • • Hot dip galvanized or powder coated finish
  • • 600 mm long
  • • Nail on insulator
  • • Available in black
WALL TOP BRACKET STAY

Wall top bracket stays are made to complement the bracket range. They offer a sturdy construction and support for the brackets on the corners and at the end of a fence. The wall top brackets stays have the following features:

  • • Lenght: 750mm
  • • Diameter: 8mm
  • • Hot dip galvanized or powder coated finish
  • • Available in black

Accessories

RS485 COMMUNICATION CARD
FIBER OPTIC COMMUNICATION CARD
DRUID I/O RELAY CARD
SOLID ALUMINIUM WIRE – 1.6MM
RS485 COMMUNICATION CARD

RS485 communication card allow energizers that are located far apart to communicate with each other and the system. Both Fiber optic card and the RS485 cards can be installed inside the secure view 24 energizer housing and are powered by the electric fence energizer. Fiber Optic cards are the preferred option and must be used in high lightning areas.

FIBER OPTIC COMMUNICATION CARD

Fiber optic communication card allow energizers that are located far apart to communicate with each other and the system. Both Fiber optic card and the RS485 cards can be installed inside the Druid 24 energizer housing and are powered by the electric fence energizer. Fiber Optic cards are the preferred option and must be used in high lightning areas.

DRUID I/O RELAY CARD

The Druid 24 LCD expansion card is a relay card with 4 inputs and 10 relay outputs. It is used with the Druid 24 LCD energizer to increase the number of inputs and outputs to the energizer for integration purposes. The outputs can be programmed to show and mimic, zone 1 or 2 on/off or high and low voltage, mains failure, battery low, alarms zones, service and tamper conditions. The relay inputs can be programmed to control the individual zones, on and off and set the high or low voltage mode.

SOLID ALUMINIUM WIRE – 1.6MM

Aluminium solid wire – 1.6 mm Aluminium wire has a very low electrical resistance allowing long fences to be powered up from only one energizer. Its high resistance to corrosion offers a long life span on the fence. The aluminium solid wire have the following features:

  • • Diameter: 1.6 mm
  • • Resistance: 27 Ohms/km
  • • Unit: 1000 m

FLAT BAR INSULATOR

The flat bar insulator is used with the flat bar profile posts to hold the wire on inner post or hook with a tensioner. The flat bar insulators have the following features:

  • •Quick fit clips on the top and bottom for faster installation
  • •Feed through clip option built in
  • •Easy to change and maintain
  • •Available in black

LARGE TAIL HOOK

The large tail hooks are a quick fit hook system for the Nemtek flat  bar insulators  to connect tensioners. They offer the following features:

  • •Stainless steel finish for long life expectancy
  • •Have a large tail to fit the Nemtek range of tensioning devices
  • •Fit quickly onto the Nemtek round and flat bar insulators.

FENCE PROTECTION SYSTEM

Fence protection systems with intruder detection are the first layer of the perimeter protection. The fence mounted detectors can sense climbing, cutting, sawing of the fence, which means we can detect any penetration determination, before the intruder could enter into the protected area, provided enought time to the guards to react.
This type of systems can be used for perimeter protection of solar power plants, prisons, logistic centers, airports, power plants, refineries, military objects, but also in the residential area.

FAQ

Most frequent questions and answers
  • Low cost of an Electric Fence. An electric fence can perform the same task as a conventional fence using much less material. …
  • Easy to build. …
  • Durability. …
  • Universal application. …
  • Flexibility. …
  • Low maintenance. …
  • Less stock damage

TB cable is the other main part of the Quadrosense fence protection system. This sensor cable is a special Triboelectric cable, which detects the vibration of the fence caused by an intruder

The flat bar insulator is used with the flat bar profile posts to hold the wire on inner post or hook with a tensioner.